Skip to content

Join Us for a 2021 Training Class with COVID-19 Safety Protocols in Place

Are you ready to fulfill your career goals of gaining a better understanding of your Uninterruptible Power Supply (UPS) system? Join us for one of our week-long, hands-on training classes in 2021 and receive 2.4 Continuing Education Units (CEUs) upon completion.

Course Overview

UPS Training – Become more knowledgeable on how your Digital Process Power or Ferroresonant UPS system works and how to maintain it. This training includes:

  • UPS Introduction and Component Basics
  • Preventive Maintenance
  • Detailed Principles of Operations
  • Failed Component Identification
  • Tips and Techniques for Troubleshooting
  • Practical Hands-on-Labs

Stationary Battery Training – Our battery lab allows for practical hands-on training that covers a wide array of topics, including:

  • Battery Introduction and Fundamentals
  • Battery Safety
  • Battery Installation and Maintenance
  • Load Testing
  • Troubleshooting Tips and Techniques

We understand you may be hesitant to join us in 2021, but the safety of our clients and staff is our number one priority. We will follow a detailed safety protocol that is based on federal and local government health guidelines.

Our current COVID-19 safety procedures and protocols include:

Daily Screenings

  • Upon arrival to our training facility, AMETEK Solidstate Controls personnel will check your temperature using a non-contact infrared thermometer. Anyone with a temperature of 100.4° F (38° C) or higher will not be permitted into the facility.

Cleaning and Sanitation

  • Our team will sanitize our facility and training materials daily. Hand sanitizer and disinfecting wipes will be readily available. Additionally, the HVAC filters have been upgraded to MERV 13 grade to prevent airborne contamination.

Social Distancing, Barriers and Face Coverings

  • We reduced the class sizes, allowing each attendee to have their own table. The tables have plexiglass barriers to protect against airborne transmission of respiratory droplets.
  • Face coverings will not be mandatory in the classroom setting if six feet is maintained or barriers are between individuals. Face coverings are required when entering the facility, traveling to and from the training rooms and during breaks.
  • Lab work will be conducted in groups of no more than two people. We will provide a face shield or Arc flash shield when working with high voltage, which will be disinfected after each use. Nitrile gloves will be required when operating systems and test equipment.

Breaks, Food and Beverages

  • In our break area, tables are spaced six feet apart and each is limited to one chair. To help maintain social distance, participants may use training rooms not being used for classroom activities as additional break space.
  • Each training day lasting five hours or more includes a complimentary, individually packaged lunch from an approved vendor. Any snacks or beverages provided will be individually wrapped or bottled and coffee will be made with single serving packs.

We hope these efforts help put your mind at ease and enable you to gain the invaluable knowledge our UPS system and stationary battery training offers. To learn more about these safety protocols, click here.

If you want to learn more about training, view the 2021 training dates or register for one of our limited seats, please visit our training page.


Skip Navigation Links.