System Features Full Remote Control and Monitoring and Industrial Hardened Electronics

COLUMBUS, OH-BP's Alaskan oil pipeline shutdown demonstrated how critical it is to protect vital oil and gas pipelines, storage, transmission and distribution facilities from corrosion-related disruptions. Automatic Cathodic Protection Systems from AMETEK Solidstate Controls have proven to be the most advanced and reliable technology for protecting essential energy pipelines and structures from costly corrosion-related problems.
Solidstate Control has had more than a decade of field experience in the design, manufacture and operation of durable and reliable automatic cathodic protection systems for the oil and gas industry. Their industrial grade design makes them suitable for even the harshest environments, including ambient temperatures below -20oF (-30oC) and winds up to 125 miles (200 kilometers) per hour.

The Solidstate Controls most advanced systems-the ACTS 2000 and ACTS 2002 Series Cathodic Protection Rectifiers--incorporate the latest remote control and monitoring capabilities, including On-Off Test Switch, GPS synchronized on each one of their outputs, state-of-the-art communications using satellite, radio, Ethernet, cellular or microwave technology. The systems are complete with an ample variety of Communications Support Software.

Units are available in single and multiple outputs, and depending on application, users can select from Constant Current, Constant Voltage or Constant Potential operation. One important characteristic of the ACTS Series Rectifiers is their ability to operate in almost all output voltage ranges, keeping very low output ripple values even under full load condition. That ability is unique in rectifiers of this type.

The ACTS 2000 is a single output automatic rectifier with the latest switching architecture for cathodic protection, robust design and excellent telemetry. This highly reliable device utilizes IGBT and microprocessor technologies and is well suited for pipelines and other single structures.

The ACTS 2002 is the most advanced multiple output rectifier for cathodic protection available. It offers outstanding flexibility and ease of integration. Modules can be connected individually or in parallel, allowing one system to monitor and protect multiple structures such as tanks, pipes or casings.

Solidstate Controls also offers DCTS2000 and DCTS 2002 Automatic Converters that are designed as retrofit units for automating existing manual type rectifiers allowing them to perform to the same standards as the ACTS 2000 and 2002

AMETEK Solidstate Controls is a recognized leader in UPS and battery management systems for industrial applications and power generation as well as cathodic protection systems. It specializes in the design and manufacture of highly customized inverters and UPS systems for critical processes involving harsh environments such as power generation (including fossil fuel and nuclear power utilities).

AMETEK is pleased to announce the appointment of Narayan Vishwanathan to the position of Marketing Manager.

COLUMBUS, OH Download PDF of this Press Release

In this position, Narayan will focus on strategic marketing, new product initiatives and market segments, with the objective of helping SCI expand its International capabilities.

Narayan joins Solidstate Controls from Ingersoll Rand where he held positions in Product Management and Business Management. Prior to joining Ingersoll Rand, he held various positions in Process Engineering and Business Development with a large business conglomerate in India. Nayayan has a B.S. and an M.S. in Chemical Engineering. Most recently he earned his M.B.A. (International Business) at the University of South Carolina’s Moore School of Business.

AMETEK Solidstate Controls (SCI) is pleased to announce the introduction of four new Upgrade kits to its legacy UPS product lines

COLUMBUS, OH Download PDF of this Press Release

• Voltage Control Board Upgrade for Battery Chargers
• Oscillator/Sync Board Upgrade for Inverters
• Crest Factor Board Upgrade for Static Switches
• An Externally Mounted 3-Position Manual Maintenance Bypass Switch

In keeping with our philosophy of supporting units in the field as long as practical (more than 25 years in many cases!), we have created these upgrades for SCI’s analog-based, non-microprocessor equipment. Although these upgrades are designed to be installed during a regularly scheduled PM, they can be scheduled as a stand-alone service trip.

A board upgrade to your existing equipment is an economical solution to improving your system’s performance, and extending the life of your units. The 3-position manual switch, although not a new product or upgrade, can add reliability and safety to an already installed system, or increase the
flexibility and ease of installation for a new UPS or Inverter.

For additional information or to schedule a service, contact Jean Falor or Jim Ackinclose of the SCI Client Service group at 614-846-7500.

For a detailed description of these upgrades, go to the Support page.

Solidstate Controls Names Roberto Drummond Country Sales Manager In Brazil

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls has announced the following staff appointment:

Roberto Drummond has been appointed to the position of Country Sales Manager in Brazil.

Mr. Drummond will be responsible for organizing and managing Solidstateís sales efforts and business in Brazil, working with Key Clients, such as Petrobras, the Brazilian oil company (the largest Industrial Corporation in Brazil). He will work with local Representatives and Regional Distributor networks, promoting all of AMETEK Solidstate Controlsí Products and Services and developing long-term relationships that will promote company growth and strengthen our presence in Brazil.

Roberto brings twenty years experience in the sale of capital goods for several industry-leading companies to this position, such as General Electric do Brasil S/A; Siemens S/A, ATEC; ComÈrcio e RepresentaÁžes Ltda, and AGNUS ñ Tecnologia EletrÙnica Ltda. While with those companies, Roberto worked on projects in Power Generation and Oil & Gas markets. Roberto holds a degree in Electrical Engineering, from the Universidade Gama Filho in Rio de Janeiro; and a Masters Degree in Finance, from the PontifÌcia Universidade Catlica do Rio de Janiero- PUC. In addition, he holds a Marketing Specialist certificate from The Superior School of Advertising and Marketing in Rio de Janeiro.

New Twelve (12) Pulse Rectifier Bridge Design

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls of Columbus, Ohio USA is pleased to announce the latest enhancement to our new BCR series Industrial Battery Charger design ñ a twelve (12) pulse rectifier bridge design.

The 12 - pulse design is aimed at satisfying specification requirements for reduced (<10%) reflected current harmonics. In certain applications, depending on the nature of a plantís electrical distribution system, the rectification process (converting AC power to DC power) can negatively impact upstream devices, such as transformers, switchgear, relays, etc. by adding (or reflecting) high current harmonics (as much as 30-40%, or higher) onto the plantís AC power network. These levels can lead to overheating, thereby damaging sensitive electrical and electronic equipment.

By limiting the reflected harmonics to less than 10%, the BCRís 12-pulse design eliminates the Userís need to add any additional filtering, or other active devices, which can be costly and take up valuable real estate. The 12-pulse design meets the intent of IEEE 519-1992, as it applies to UPS systems and Battery Charger/Rectifier systems.

The BCR Battery Charger is intended for use in UPS systems, coupled with a Solidstate Controlsí Inverter, or in stand-alone station battery charging applications.

New BCR Series Battery Chargers From Solidstate Controls Offer Features And Enhancements For UPS System Users

Standard Options and Features Fit Into Single Sleek New Cabinet Bay

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls has introduced its newly-designed BCR Series Industrial Battery Chargers. The BCR is intended for use in Uninterruptible Power Supply (UPS) Systems, with a Solidstate Controls inverter; or as a stand-alone device for battery charging only applications. Although the basic performance specifications remain similar to Solidstate Control’s existing RCSPlus Series Battery Charger, the new BCR Series has a number of significant features that enhance its suitability for end users. The most notable change is the cabinet that has been designed so that all standard sizes (ampere ratings), options and features for the BCR fit into a sleek, single cabinet design. The previous design required three cabinet styles and sizes, spread across the product line.

Several options that had been custom features on the RCSPlus Series are now available as pre-engineered options on the BCR Series. These include, to name a few: a 0.1% ripple filter, top cable entry, auto-equalize timer and digital meters. A significant improvement has been made to how end users connect their incoming and outgoing cables to the BCR Series chargers. Cable training can be done easily through either the top or bottom of the enclosure. A wire raceway is provided for power cables.

BCR Series Battery Chargers are thyristor-based systems designed for highefficiency conversion of incoming commercial AC to DC power for charging large banks of station batteries, while supplying power to continuous DC loads such as invertors. BCR Series Chargers are industrial grade, built to operate in extreme environments and offering high reliability with an MTBF exceeding 140,000 hours (16 years).

AMETEK Solidstate Controls is a recognized leader in UPS systems for industrial applications and power generation. It specializes in the design and manufacture of highly customized inverters and UPS systems for critical processes involving harsh environments such as power generation (including fossil fuel and nuclear power utilities).

AMETEK Solidstate Controls has administrative and manufacturing operations at its 875 Dearborn Drive, Columbus, Ohio, location. It is a unit of AMETEK, Inc., a leading global manufacturer of electronic instruments and electric motors with annual sales of more than $1 billion. All of its products are marketed through an independent network of manufacturer’s representatives and distributors in the United States and 27 foreign countries. Solidstate’s commitment to the customer service continues long after the sale with a worldwide network of skilled, experienced field service technicians available for UPS installation, start-up, on-site service, and training.

For additional information, contact Solidstate’s Marketing Department at 875 Dearborn Drive, Columbus, OH 43085 USA. Phone: 614-846-7500. Fax: 614-885- 3990.

AMETEK SOLIDSTATE CONTROLS LAUNCHES RUSSIAN LANGUAGE WEBSITE

COLUMBUS, OH Download PDF of this Press Release

Solidstate Controls, a recognized leader in UPS systems for industrial applications and power generation, has developed another International Website – this time in Russian: http://www.solidstatecontrolsinc-ru.com.

"Our goal is to make it as easy as possible for our clients worldwide to get information about our company and our products in their native language whenever and wherever they need it," says Ed Williams, Director of Sales and Marketing for AMETEK Solidstate Controls.

"Our latest site in Russian will help our Russian-language customers as we expand our position in this important emerging market. Russia is one of the largest oil producing areas and many of our products are designed specifically for the oil and gas industry, most notably our Cathodic Protection Rectifier systems.

"Making ourselves known in a country where we have not previously done business is a challenge. Our Russian language Website is just one of the tools we have at our disposal to meet that challenge," adds Mr. Williams.

Several pieces of Solidstate product literature also are available in Russian and can be downloaded from the Website or requested from the Solidstate Marketing Department (see address below).

Solidstate's Russian language Website complements its other International Websites that serve Spanish, Chinese, and Brazilian Portuguese speaking clients. They are located at www.solidstatecontrolsinc-esp.com; www.solidstatecontrolsinc-chn.com; and www.solidstatecontrolsinc-bz.com, respectively. These are in addition to the Company's main Internet portal at www.solidstatecontrolsinc.com, and its Website created specifically for Nuclear Utility clients: www.nuclearups.com.

AMETEK Solidstate Controls is well established overseas with equipment installed at over 20,000 power generation and petrochemical sites worldwide. Solidstate specializes in the design and manufacture of highly customized inverters and UPS systems for critical processes involving harsh environments such as power generation (including fossil fuel and nuclear power utilities).

Solidstate has administrative and manufacturing operations at its 875 Dearborn Drive, Columbus, Ohio, location. All of its products are marketed through an independent network of manufacturer's representatives and distributors in the United States and 27 foreign countries.

Solidstate's commitment to customer service continues long after the sale with a worldwide network of skilled, experienced field service technicians available for UPS installation, start-up, on-site service, and training.

Bob George Named Manager - Corporate Quality Systems

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls (Solidstate Controls), of Columbus, Ohio, USA is pleased to announce the appointment of Bob George to the position of Manager - Corporate Quality Systems. Mr. George’s primary responsibilities will be managing the overall quality systems at all Solidstate Controls locations, including HDR and AMETEK Solidstate Controls de Argentina

Working with k sff and other responsible parties, Bob will insure that all of the quality systems and quality efforts are focused on and in-line with the company purpose and key strategic initiatives, and develop and maintain consistency among all Solidstate Controls locations. He will assure that quality continues to be the Solidstate Controls cornerstone in meeting client satisfaction. Bob will continue to manage Solidstate Controls’ ISO Quality Management program at all AMETEK Solidstate Controls manufacturing locations.

Bob brings to this position more than 25 years of experience with Solidstate Controls where he has held several manufacturing and Quality-related positions. In addition, he has six years of Quality Assurance experience in the commercial nuclear power generation industry. Bob holds a Bachelor of Arts degree in Business Administration along with an Associate degree in Electrical Engineering.

SOLIDSTATE CONTROLS TO SUPPLY UPS AND BATTERY SYSTEMS FOR MIDAMERICAN ENERGY COUNCIL BLUFFS ENERGY CENTER UNIT 4
Selected by Hitachi America for New 790-Megawatt, Coal-fueled Generating Plant

COLUMBUS, OH Download PDF of this Press Release

Hitachi America, Ltd., has selected AMETEK Solidstate Controls to furnish uninterruptible power supply (UPS) systems, battery chargers, batteries and AC and DC panel boards along with associated equipment for the new 790-megawatt, coalfueled electric generating plant under construction in Council Bluffs, Iowa, by MidAmerican Energy Co.

The selection was made after Hitachi America conducted extensive technical and engineering discussions with Solidstate Controls over the past year and a site visitation to its Columbus, Ohio, manufacturing plant. The purchase order, valued at more than $1 million, represents the largest project awarded to Solidstate Controls by Hitachi America.

The $1.4 billion Council Bluffs Energy Center Unit 4 is a joint venture between MidAmerican Energy of Des Moines, Iowa, and 13 other utilities that make up the Corn Belt Power Cooperative. The plant is expected to begin operation in 2007 and will employ the best available control technology for new coal-fueled electric generating plants. MidAmerican currently operates three other generating units at the site.

The prime contractor for the project is Mitsui Corporation, which retained Hitachi, Ltd, to supply electrical equipment and components for the new plant. Sargent & Lundy LLC, a worldwide leader in professional services to the electric power industry, provided project engineering.

"Solidstate Controls has worked with Sargent & Lundy many times over the past 35 years on a variety of domestic and international power projects. Our relationship with them and their favorable recommendation of us to Hitachi America were major reasons for our selection," notes George Ardolino, Divisional Vice President. "Solidstate Controls has more than 40 years experience supplying this type of equipment for both fossil- and nuclear-fueled power plants. Our engineers also draw upon an average of 14-years of design experience on similar projects."

"Although shipment of equipment is more than a year away, we needed to deliver the majority of the engineering drawings and other documentation within two to four weeks with the balance due within eight weeks. Normal turnaround for a project of this magnitude is eight to 12 weeks. Reducing the lead-time in half is a testament to our commitment to Hitachi and an expression of confidence in our design team," he adds.

AMETEK Solidstate Controls is a recognized leader in UPS systems for industrial applications and power generation. It specializes in the design and manufacture of highly customized inverters and UPS systems for critical processes involving harsh environments such as power generation (including fossil fuel and nuclear power utilities). Solidstate Controls also offers battery management systems that continuously monitor the health of multiple cell batteries used in permanent standby power installations and accurately predict their condition, performance and life expectancy, reducing required maintenance and preventing their premature failure.

New DPP Series Single-Phase UPS System

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls of Columbus, Ohio, USA is pleased to announce the introduction of its latest product offering, the DPP series single-phase UPS system. The DPP series is part of SCI’s PROCESSPOWER® family of UPS products. The DPP is a true, on-line double-conversion system, that provides clean, regulated, continuous power for critical AC loads. The DPP utilizes a state of the art digitally controlled Pulse Width Modulated (PWM) inverter design that offers advanced communications and control capability.

The single-phase DPP is an addition to the product line that already includes the 3DPP, three-phase design. DPP systems are ideally suited for the needs of the chemical, offshore, process control, power generation, and petrochemical industries. The DPP design incorporates input and output isolation transformers, a dual-source, fully controlled and rated static switch, and a customer-specified internal or remote manual bypass switch. The unit includes a man-machine interface panel with LCD touch screen that enables continuos monitoring of system status and displays the status via an operational mimic diagram on the LCD panel. User friendly system “Help” buttons and system messages are strategically placed to describe and define menu key functions and displayed data. The menu-driven touch screen is password protected against unauthorized or inadvertent access.

Located directly beneath the display screen is a system interface keypad that provides control of all critical UPS functions, eliminating the reliance on the touch screen for basic operational control of the UPS system. The system’s serial (Db9) communications capabilities allow users access to advanced system diagnostic features as well as system adjustments. System reports include information on system voltage, current and frequency, as well as active and historical alarm events, and battery discharge activity. The data logging feature further enhance user’s ability to quickly troubleshoot the system, and trend battery usage.

AMETEK Solidstate Controls de Argentina ISO 9001:2000 Certified

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls, of Columbus, Ohio, USA is pleased to announce that AMETEK Solidstate Controls de Argentina has successfully passed its ISO 9001:2000 certification assessment on its initial audit. Considering that they began the process a little less than one year ago, this is a very significant accomplishment.

Located in Rosario, Argentina, the company formerly known as JCB Industrial, has been manufacturing industrial UPS systems, and other related electrical distribution equipment, including: Rectifiers/Battery Chargers, Inverters, Static Switches, Regulating Transformers and Distribution Panels for nearly 20 years. They also manufacture Cathodic Protection Rectifiers for the Oil and Gas Industry. They have been part of the AMETEK Solidstate Controls family for 4 years.

AMETEK Solidstate Controls de Argentina's ISO 9001:2000 certification will carry both the ANSI-RAB mark for the U.S. and the RvA (Dutch) mark (which is widely recognized throughout the world), in addition to Inmetro (Brazilian accreditation). Fernando Marin, Production Manager, led a dedicated team that has worked very diligently over the past several months to insure that the process worked for all levels of the organization and kept everyone focused on meeting their goals. Federico Meyer, General Manager, supported the entire process and team effort – without that support, this goal could not have been accomplished. "Having ISO 9001:2000 certification will further solidify our position as the most reliable supplier of UPS systems in the industry", stated Mr. Meyer. "This will help create more opportunities and reassure clients that we do what we say we can do."

ISO 9001:2000 is an operating management system that assures a consistent quality of product by insuring that procedures are consistent, and followed throughout the organization. These procedures encompass contract negotiations, design, manufacturing, shipping, after market services and all related documentation.

Robert George, Solidstate Controls' Quality Systems Manager, expressed a great deal of confidence in Mr. Marin and his entire team. "Any company that receives ISO 9001:2000 on its first assessment has performed a major accomplishment. Mr. Meyer, Mr. Marin, and the entire staff are to be congratulated on a job well done!"

Fusible Panelboards From Solidstate Controls Provide Critical Fault Protection For Ups And Invertor Applications

Certification Ensures Added Integrity and Peace of Mind for UPS End Users

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls has introduced a new line of AC Fusible Panelboards (FPB Series) that are designed especially for critical power distribution needs of uninterruptible power supply (UPS) and invertor applications.

Critical AC loads often are subjected to high-magnitude, short-circuit currents that result from a fault on the secondary, or load, side of the UPS/Invertor that can cause severe damage to equipment or result in loads being dropped, creating problems for Operations personnel. Those faults must be isolated from all other branch circuits to avoid a cascading effect. Solidstate Controls' FSB Series panelboards ensure that a single faulted circuit will not adversely affect any other branches or critical loads by clearing the faults in a quarter cycle or less.

The UL-listed FSB Series panelboards utilize semiconductor current-limited fuses in series with a molded case circuit breaker. The semiconductor fuse provides protection from potentially catastrophic short circuits generated by a fault, while the breaker provides for long-term sustained overload protection. The combination of the series fuse and circuit breaker provides the FPB Series equipment with significant advantages versus other types of AC panelboards that are equipped with either fuses (with or without switches) or breakers only.

The FPB Series are manufactured by the HDR Power Systems unit of Solidstate Controls and are available in a range of current and voltage ratings that can be configured to meet user requirements.

Solidstate has administrative and manufacturing operations at its 875 Dearborn Drive, Columbus, Ohio, location. All of its products are marketed through an independent network of manufacturer's representatives and distributors in the United States and 27 foreign countries. Solidstate's commitment to customer service continues long after the sale with a worldwide network of skilled, experienced field service technicians available for UPS installation, start-up, on-site service, and training.

AMETEK Solidstate Controls is a unit of AMETEK, Inc., a leading global manufacturer of electronic instruments and electric motors with annual sales of more than $1 billion.

For additional information, contact Solidstate's Marketing Department at 875 Dearborn Drive, Columbus, OH 43085 USA. Phone: 614-846-7500. Fax: 614-885-3990.

Solidstate Controls Earns UL And CUL Certification For Its 3DPP Series Of Processpower® UPS Products

Certification Ensures Added Integrity and Peace of Mind for UPS End Users

COLUMBUS, OH Download PDF of this Press Release

AMETEK Solidstate Controls has received UL and CUL certification for its 3DPP Series of Digital ProcessPower ® Uninterruptible Power Supply (UPS) systems. Although the 3DPP Series was designed with user safety in mind and built in accordance with UL/CUL specifications, certification ensures 3DPP Series users the added integrity and increased peace of mind that comes with the UL/CUL label.

Prior to certification, Solidstate relied upon third party certification services to satisfy the requirements of placing UL/CUL labels on its equipment. The new certification offers a more economical solution for Solidstate clients and applies to the 10-50 kVA models in standard input and output voltage combinations, which cover greater than 90% of 3DPP Series' current client base.

The 3DPP Series is part of Solidstate's ProcessPower ® family of UPS products. It is a true, on-line double-conversion system providing clean, regulated, continuous power for critical AC loads. The 3DPP utilizes a stateof- the-art digitally controlled Pulse Width Modulated (PWM) inverter design that offers advanced communications and control capability. The 3DPP Series is ideally suited for the needs of the chemical, offshore, process control, power generation, and petrochemical industries. Its design incorporates input and output isolation transformers, a dualsource, fully controlled and rated static switch and a customer-specified internal or remote manual bypass switch.

Each unit includes a man-machine interface panel with LCD touch screen that enables continuous monitoring of system status and displays the status via an operational mimic diagram on the LCD panel. User friendly system "Help" buttons and system messages are strategically placed to describe and define menu key functions and displayed data. The menudriven touch screen is password protected against unauthorized or inadvertent access.

Located directly beneath the display screen is a system interface keypad that provides control of all critical UPS functions, eliminating the reliance on the touch screen for basic operational control of the UPS system. The system's serial (Db9) communications capabilities allow users access to advanced system diagnostic features as well as make system adjustments. System reports include information on system voltage, current and frequency, as well as active and historical alarm events, and battery discharge activity.

Solidstate has administrative and manufacturing operations at its 875 Dearborn Drive, Columbus, Ohio, location. All of its products are marketed through an independent network of manufacturer's representatives and distributors in the United States and 27 foreign countries. Solidstate's commitment to the customer service continues long after the sale with a worldwide network of skilled, experienced field service technicians available for UPS installation, start-up, on-site service, and training.

AMETEK Solidstate Controls is a unit of AMETEK, Inc., a leading global manufacturer of electronic instruments and electric motors with annual sales of more than $1 billion.

For additional information, contact Solidstate's Marketing Department at 875 Dearborn Drive, Columbus, OH 43085 USA. Phone: 614-846-7500. Fax: 614-885-3990.

Battery Management And UPS Systems From Solidstate Controls Prove Their Worth During Blackout And Hurricane Of 2003

Power Outages Demonstrate Need for Power Protection Systems

COLUMBUS, OH Download PDF of this Press Release

Users of Battery Management, Uninterruptible Power Supply (UPS) and other power protection systems weathered the Blackout of 2003 and Hurricane Isabell because their systems performed exactly the way they were designed.

"By taking a proactive approach to battery monitoring and power protection, " noted one AMETEK Solidstate Controls customer, "we didn't need to worry about dropping the loads that were connected to the utility system. We already had more than enough to worry about and avoided another disaster recovery, resulting from the power outage."

Battery management systems, such as the Series BMS2000V Battery Monitor/Analyzer from Solidstate, continuously monitor the health of multiple cell batteries used in permanent standby power installations and accurately predict their condition, performance and life expectancy. By measuring and evaluating critical indicators, overall and individual cell voltage, impedance, discharge/charge current and battery temperature, the BMS2000V Battery Monitor/Analyzer reduces required maintenance and prevents premature failure.

UPS Systems manufactured by Solidstate, are designed to provide continuous clean, regulated power for critical loads in process control and industrial applications. They provide sufficient backup power to safely and properly shutdown critical process systems during power outages or disruptions. They also are important if clean, transient-free power supply is a key factor for critical control systems. Oftentimes, power aberrations such as surges, sags and brownouts can damage systems or cause errors in data readings.

Most UPS systems in use today, however, are designed for the relatively clean, controlled environments of a computer room or similar facility and are not suitable for harsh or demanding environments, such as a power plant or processing facility. An industrial grade UPS system of ferroresonant design, such as SEPlus UPS system from Solidstate, is designed specifically for these types of applications.

With its vacuum impregnated magnetics and 200°C epoxy insulation, the SEPlus UPS system is better suited to extreme operating environments than standard UPS systems, which rely on complicated power devices with complex feedback circuits that must be protected or isolated from the harsh industrial conditions.

Solidstate is a recognized leader in battery management and industrial UPS systems. It specializes in the design and manufacture of highly customized inverters and UPS systems for critical processes involving harsh environments such as oil production and refining, chemical and petrochemical processing, steel and power generation (including fossil fuel and nuclear power utilities).

Solidstate Controls is a unit of AMETEK, Inc. and part of its Electronic Instruments Group (EIG) --a recognized leader in advanced monitoring, testing, calibrating and display instruments. AMETEK, Inc. (NYSE: AME) is a leading global manufacturer of electronic instruments and electric motors with annual sales of more than $1 billion.